Although in the same product family, the SGP with the latest firmware 1. However I think this will work, as we are not expecting the devices themselves to tag any packets:.
Here are the settings for all four VLANs:. The layout here is also a bit different from the SFFP. I am trying to set up my trunk VLAN on my switch.
Actually, it does seem like I am going to have to do the Factor Reset for the th time. Apparently, not the best way to do that, since after rebooting, I am no longer able to access or even ping the device.
I really thought this would be a small task and I could move onto other things, but no such luck! RT-N16 maybe vlan2, but use the nvram lookup to find what is right on your router! EDIT: sweet, it works now after putting it in the firewall box.
Thanks everyone! EJmcn 11 May Last edited on 11 May by EJmcn Show more. Matadi 12 May You've forgotten to put iptables line to firewall script. New Post.
Permanent Link Edit Delete. Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-ShareAlike 3. The gateway might be changed which is weird considering I enabled openvpn route-nopull option.
Perhaps the static route put in place via your tomato settings is being usurped by the route injected via OpenVPN? I repeated the process 4 times , erasing nvram and nothing …. Any idea? Please help me Thanks in advance. Very useful guide. Wanted Port4 to have Internet Access only no access to the local network. Hey Paulo, does static IP and a gateway work instead? I had issues using some RFC private address spaces like Could you describe in more detail the alternate solution?
My aim would be to give Port 4 just Internet — no access to other devices. Because I do use a central computer on the main Vlan to access these camera I needed to make a change to the firewall option here as the example you provided block all forward traffic from br1 and not just the external. Will this work with my tomato shibby device E in router mode ie as a switch for an upstream gateway?
However devices on VLAN3 are unable to access internet. Sorry to the delayed reply — could only come back to this today. DHCP is working with Port4 as desired. Read your suggestion and made a few changes, so that my configuration now looks like:. Is this as it should be? You can do this from within the Tomato UI. It does give me a second bridge with different ip addresses, but everything is accessible from every interface.
Perhaps a limitation of this cheap hardware? What I would really like to do is to create a routed wifi for people, but be able to link a couple of lan ports to the wan interface so that the 3 devices plugged into wan port and lan ports 1 and 2 all find themselves receiving dhcp addresses from the wan. You can also experiment with adding your own rules in the advanced area of Tomato. My setup is totally isolated in that anything in my All works as explained.
I have my IoT phillips hue in an isolated vlan, but homekit is not working when my phone is connected to the main Wireless LAN. Any advise? Hi Will, Thanks for the great guide, it really helped me last year with setting up a VLAN for guest wi-fi on my router. Everything worked beautifully! The host is connected to a physical port on router mapped to VLAN1. Both the host and guest are running Windows 7.
Result: guest OS cannot obtain an IP address at all, no connectivity. I believe that it does this via wireless by the SSID used virtual wireless in the case of tomato.
I am not sure about mac address separation but the Tomato forums would be the best place to ask. The same would apply if you were to say plug another switch into that VLAN port.. I hope this helps, let us know how it goes. Still useful, thanks. Are you still using Shibby? But it seems to have a weakness when I compare it to my ubiquiti devices on the subject of vlans.
With ubiquiti I can create vlans which will cross routers no problem. I can do it in my house at night. Tomato seems to oblige me to go to the site with a cable. Is there a way around this? How do I setup the wireless networks on my other access points? Attached to these by ethernet are three other routers acting as access points. All of these other routers run as access points all under the same WiFi network. I want to create a virtual network or a guest network to run from all of these in order for my IoT devices to be on the secure network.
How do I set that up? Still a great guide in Found the weird bug with the subnet Thank you! I have read people are saying this guide has it backward, how so?? You are commenting using your WordPress. You are commenting using your Google account. You are commenting using your Twitter account. You are commenting using your Facebook account. Notify me of new comments via email. Notify me of new posts via email.
This site uses Akismet to reduce spam. Learn how your comment data is processed. Email Address:. Hop the Train. Skip to content. Access devices on the isolated network from your private network but not vice-versa. Provide a separate, virtual guest WiFi network or wired connection that allows internet access but no access to the rest of your network. Enter an RFC private address range e.
Like this: Like Loading This entry was posted in open source , sysadmin and tagged asus rt-n66u , IoT , linux , linux home vlan router , networking , security , shibby , tomato , tomato firmware vlan , vlan , wireless vlan. The only thing interesting here was that its signal strength was —85 dB, a fairly weak signal. My hunch is that this means one of the residential neighbors has learned the loosely-kept WiFi password. This blocks Internet access, which solves the main issue bandwidth use.
We may wind up changing the WiFi password. I recently upgraded my Linksys E router to Tomato Firmware v1. This includes quite a few default QoS rules. The class was Crawl , i. Looking up the Classification list a bit, I saw that there was a rule designed to identify file transfers on ports 80, , or , but it was restricted to TCP only:.
Switch Editions? Channel: tomato — MCB Systems. Mark channel Not-Safe-For-Work? Are you the publisher? Claim or contact us about this channel. Viewing all 14 articles.
Browse latest View live. Then follow these steps to split the wireless into a separate VLAN: 1. Click on Add. You can set up the WGTv3 in several modes: Client: basically just an external network card for a device.
Bridge: allows connecting multiple wired devices to the WGTv3. This article deals only with the second and third options. Turn off wireless encryption during setup. Later you can enable WEP bit. If the main router is on Notes You have to run TelnetEnable every time you want to connect via Telnet. The WGTv3 seems to drop the connection after a minute or two of inactivity.
I found that I sometimes had to power cycle the router before I could reconnect via Telnet. Finally, the Actual Configuration With that brief orientation, here are the commands to actually set up bridge mode. Or if you already enabled it, to display the WDS status and then disable WDS, after establishing the Telnet connection: wla get wds set wds disable.. Here the commands I ran each command is preceded by a and their output.
0コメント